the smart way to monitor
DID YOU KNOW THAT 80% OF BOATS THAT SINK GO UNDER WHILE DOCKED?
Whether you have a 21-foot outboard, a 35-foot cruiser or 42-foot catamaran, industry data* shows that the majority of sinking/water incidents take place while you’re away, and your boat’s docked.
NOW THERE’S A SMART WIRELESS WAY TO KEEP YOUR BOAT AFLOAT.
ARM IT MARINE provides a suite of wireless smart sensors that keep you informed and alert 24/7. With ARM IT wireless and sensor technology, you’ll be able to monitor high water levels remotely without draining your battery or relying on an electrical outlet. It’s totally self-sufficient.
DISCOVER THE FULL SUITE OF
ARMIT SMART SENSORS.
ArmIt Remote Boat Monitoring
ArmIt Marine provides the simplest, most affordable boat monitoring system on the market today, offering boaters an instant solution to Protect What Matters Most. Getting your Boat Connected has never been easier. Monitor bilge water levels, open or closes on hatches, doors or cabins, temperature or water leaks. Worried about unauthorized persons on your boat? No problem, get instant Photo-Alerts to your smart-phone with MotionCam Pro™.
Did we mention simple? ARMIT MAX Series™, IoT-Monitoring™ sensors are battery powered and have the network built-in. Our sensors are completely autonomous, self-sufficient and require no additional equipment to operate. No Hubs, No Gateways, No Routers, No Power, No Unreliable WiFi at your dock, marina, or mooring. Best of all, no complex programming or wiring diagrams. It’s that easy, simply create your account, select your connection plan and in a few minutes power on your device and your boat is instantly connected and monitored.
PEACE OF MIND 24/7 WHEN YOU MONITOR EVERYTHING THAT MATTERS
Starting at $69.99 per year, ArmIt Network provides IoT-Monitoring and Alerts for your device.
ORDER TODAY
BE PROTECTED TOMORROW
Instant Messages
Knowledge is power. Most disasters can be averted with just a few minutes of notice. Get instant, real-time ARMIT-Alerts™.Network Inside
With the cellular connection built right in, you don't need to rely on faulty weak WiFi at your dock, mooring or marina. Use ArmIt monitoring solutions 'anywhere' in the world.Battery Powered
No wiring to boat your power systems required. Simple DIY! Battery should last 3 years in normal operation. Each ArmIt sensor has an easily replaceable AA or CR-123A battery.
ARMIT Bundle | BilgeMAX One™ and SmartMAX One™ Motion:
Simple Setup
Activate ArmIt sensors in minutes. Create your account, select your plan, wait a few minutes and power it up. It's that easy.Free delivery
For USA States and Territories and Canadian customers delivery if free. For customers in the EU just $19.99Secure payment
Most trusted online payment system with encrypted tranactions.Frequently Asked Questions
How much is cellular connectivity and monitoring for ARMIT MAX Sensors?
Our IoT-Monitoring service for ARMIT MAX Sensors, which includes annual cellular connectivity and unlimited ARMIT Alerts: text and email is $69.99 per year. Monitoring service for ARMIT MotionCAM Pro, which includes annual cellular connectivity and unlimited ARMIT Photo Alerts: text and email is $99.99 per year.
How long do the batteries last?
Using a high-quality CR123A Lithium battery, users can expect to get 400 cycles of use over an extended period. In normal operation that's 3 to 5 years. ARMIT recommends for best practice, changing the battery each season. The MotionCam PRO operates on 2AA Lithium batteries and should last 200 cycles.
How do I know if my device is working?
Your ArmIt device is configured to check-in to the network every 15 days and all device activity and operation parameters are available in your account dashboard at myARMIT.com.
How do I test BILGEMAX after it is installed in my boat?
Automatically: Your BILGEMAX is set from the factory to automatically preform a network check-in every 15 days. You will receive a text message and email with an ARMIT Alert: BilgeMAX NOTIFI Network Check-In, Battery OK, Signal OK GEO LOC: http://2arm.it/g2 . Manual Test: Simply turn the BILGEMAX float sensor upside down. This will active the NOTIFI sensor and you will receive a text message and email with an ARMIT Alert: BilgeMAX NOTIFI Detects Hi-Water in bilge, CHECK BOAT NOW! Battery OK, Signal OK GEO LOC: http://2arm.it/g2 . Be sure to return the switch to its normal position after you test. wo
How quickly will I be notified if water level, motion or water leaks are detected?
It takes about one minute for the notification sensor to process and sends its status change to the ArmIt network. Once the sensor reports its status change, in milliseconds ARMIT Alerts are sent via SMS text message, email and Photo-Alert to customer.
I own a marina or I am a marine service professional, can I manage multiple devices easily?
Yes, you can. Yes. the myARMIT.com IoT-Monitoring platform was designed with you in mind. Contact ARMIT or your sales representative or authorized ARMIT dealer for details.
Do you have installers?
Send an email to info@armit.co and we will be happy to get you contact info a dealer/installer in your area.
Where should I install the BilgeMAX NOTIFI and BILGEMAX Float sensos?
ARMIT recommends placing the BILGEMAX Float in the bilge just below the water line. There is 3/8" from the bottom of the blue-float housing to the bottom of the float sensor. ROute the attached 15' feet of cable to the highest-dryest part of your boat to connect to the BILGEMAX NOTIFI sensor.
My boat hat more than 1 Bilge, do I need a separate BILGEMAX kit to monitor each bilge?
No, contact your ARMIT sales representative or dealer for wiring instructions and purchase an additional BILGEMAX Float. You can connect multiple BILGEMAX Float sensors in a loop and monitor as many bilge companrments as you need
Have more questions? Feel free to contact us
Customizable
From your myARMIT.com dashboard, you can change device settings and customize alerts, notifications, multi-sites and unlimited devices.Personal cloud storage
The ArmIt Network provides complete device management and history, you can view everything on a powerful, customizable dashboard.Self updating
ArmIt cellular monitoring sensors have full two-way authentication and over-the-air provisioning. When a configuration change is made to your ArmIt MAX Series sensor, the next time it contacts the network, it self-updates.Easy to use notifications
Basic service includes ArmIt Alerts with unlimited text messages, eMail alerts, and fully customizable device management from your dashboard.The Internet of Marine Things NewsMore stories»
80% OF BOATS THAT SINK, SINK AT THE DOCK! 24/7 BOAT MONITORING AND PEACE OF MIND – JUST $69.99 / YEAR
Now that boating season is here its time to monitor your boat. Get instant messages to your smartphone whe...July 6, 2018Read more»
Give the boaters on your holiday list the gift of ArmIt peace of mind
ArmIt Marine’s suite of smart boat sensors are the perfect gifts for boaters, giving them global connectivity to remotely monitor critical functions on their b...
October 25, 2017Read more»Water
Boat Bilge Pump Monitoring, bilge water level Monitor or monitor you're for boat water leaks. Receive instant alerts to your smartphone and eMail.Photo Alerts
With MotionCam Pro - Receive instant photos when someone enters your boat or protected area.Temperature
Monitor temperature range for freezing or excessive heat and get instant alerts when out of range.We’d love to hear from you
Contact now USA +1 201-497-0900 CAN +1 647-792-8900
We're ready to answer any questions you might have about our products, a new service, or any other help you need. You can call us at the numbers above. Or, fill out our information form below and one of our team members will be in touch as soon as possible.